Stump Grinders


Where to find STUMP GRINDER - BARRETO 30SG in Spartanburg

Image for reference only
Actual item may look different
Click on image for larger view

Where to find STUMP GRINDER - BARRETO 30SG in Spartanburg Where to find STUMP GRINDER - BARRETO 30SG in Spartanburg

Click on above thumbnails for alternate view

Manufacturer: BARRETO

Model: 30-SG

4 Hour: $240.00

Daily: $275.00

Weekly: $795.00

Quantity: for a period of  
4 hour(s)   day(s)   week(s)  

Additional Information

  • For a helpful tutorial video visit
  • *ALWAYS start grinding at the EDGE of stump and work your way in towards the middle of the stump. NEVER start grinding in the Middle of the stump, or you will damage machine!!!
  • ENGINE: Briggs & Stratton Vanguard V-Twin 31hp
  • Fuel: Gasoline
  • Fuel Tank Size: 5 Gal
  • Height: 49.5
  • Length (head to side): 79
  • Length (head straight): 98
  • Width: 35.5
  • Weight: 1,700 lb.
  • Hydraulic Reservoir: 14 gallons
  • Hydraulic Flow to Head: 13.3gpm
  • Track Width: 7.1
  • Total Ground Contact: 470 sq. in.
  • Ground Drive Forward: 290 ft/min
  • Ground Drive Reverse: 180 ft/min
  • Cutting Wheel: 19.2 diameter to tooth
  • Cutting Teeth: 0.750 thick, 16 green teeth
  • Cutting Depth: 12
  • Cutting Height: 32
  • Head Swing: 134 , 99.7 arc
  • Easy controls operate the track drive and cutter wheel
  • Time-tested track design absorbs impact and provides stability
  • Center-mounted cutter wheel provides 134 head swing
  • Gear pumps coupled to the engine drive the cutter wheel, tilt, and swing
  • Counterbalance valves on each track drive prevent motors from slipping
  • The 30SG stump grinder features a variant of the same time-tested track drive platform used by the RTK trencher series. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope.
  • The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.
  • ROI
  • All hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency.

Also check the following item(s) related to the above:

* Prices are subject to change. Delivery or trailer rental fees, if applicable, will be added at time of reservation.
* Please call us with any questions about our stump grinder barreto 30sg in Spartanburg, Greenville, Gaffney, Simpsonville, and the Upstate Region of South Carolina.