Equipment Fans

AIR MOVER FAN, 6-POSITION (DRI-EAZ)

Where to find AIR MOVER FAN, 6-POSITION  DRI-EAZ in Spartanburg

Image for reference only
Actual item may look different
Click on image for larger view

Where to find AIR MOVER FAN, 6-POSITION  DRI-EAZ in Spartanburg Where to find AIR MOVER FAN, 6-POSITION  DRI-EAZ in Spartanburg

Click on above thumbnails for alternate view

Daily: $27.00

Weekly: $81.00

Quantity: for a period of  
day(s)   week(s)  


Additional Information

  • Dri-Eaz F259 Ace TurboDryer AIR MOVER 6-Position Drying/Ventilation Fan
  • WITH ITS MULTIPLE POSITIONS, USE THIS FAN TO DRY CARPET, FLOORS, WALLS, CEILINGS AND CREATE AIR FLOW
  • Two-speed fan with a 0.25HP motor that draws 1.5 amps on a 115V power supply for energy efficiency, and a tested airflow of 1881 CFM for drying applications
  • Up to eight Ace TurboDryer units can run on one 15-amp circuit for combined airflow of up to 15,048 CFM
  • Turns or tilts on non-skid rubber feet in six operating positions for precise direction of airflow
  • Locking wheel casters hold unit in place during operation for stability and safety, and a 25' power cord for access to power across large spaces
  • Stacks and interlocks with other Ace Turbodryer units for efficient use of storage space
  • Possible applications for all 7 of the Ace's positions:
  • Tilt Forward
  • - Lean the Ace forward until it rests against its front legs. This position provides the laminar airflow necessary for drying carpet, pad, baseboard, and other flooring materials.
  • Upright
  • - Set the Ace square on its feet to direct air across a room parallel to the floor. Great for ventilation or drying low-to-the-ground materials.
  • Tilt Back
  • - Lean the Ace back until it rests against its rear legs. This position directs air up at an angle for drying elevated materials like furniture, draperies, walls, etc.
  • Face Down
  • - Place the Ace on all four legs so that the airflow is directed straight down. This position is perfect for spot-drying the center of a room or any especially damp area.
  • Face Up
  • - Place the Ace on all four legs so that the airflow is directed straight up. This position works ideal for drying ceilings or overhead materials.
  • Stacked for Operation
  • - Stack up to 3 Ace TurboDryers to create a wall of high velocity air. This setup works perfectly for drying wet walls, large surface areas, or ventilating a room from a doorway.
  • Stacked for Storage
  • - Interlock your Ace TurboDryers grill to grill to save space.
  • ADDITIONAL INFO
  • Dimensions (H W D) 24 20.3 19 in.
  • Weight 33 lb.
  • Motor 0.25 hp
  • Speeds 2-speed
  • Tested CFM 1881 ft/min | 3196 m/min
  • Tested CFM per circuit 15,048 CFM per 15-amp circuit
  • Power 1.5 amps
  • Operating positions 6
  • Stackable for operation Yes
  • Stackable for storage Yes
  • Fan blade 16 in. | 40.6 cm
  • Power cord 25 ft. | 7.6 m
  • Construction Built-in Microban antimicrobial product protection to inhibit the growth of odor and stain causing bacteria, mold and mildew in this machine.
  • Safety UL/C-UL Listed
  • Product description
  • The Dri-Eaz F259 Ace TurboDryer is a two-speed fan with a 0.25 horsepower (HP) motor that draws 1.5 amps on a 115V power supply for energy efficiency, and has a tested airflow of 1881 CFM for drying applications. Up to eight Ace TurboDryer units can run on one 15-amp circuit for a combined tested airflow of up to 15,048 CFM. It turns or tilts on non-skid rubber feet in six operating positions for precise direction of airflow. This fan has locking wheel casters to hold the unit in place during operation for stability and safety, and a 25' power cord for access to power across large spaces. It stacks and interlocks with other Ace Turbodryer units for efficient use of storage space. This fan is built to comply with Underwriters Laboratories (UL) and Canadian Standards Association (CSA) safety standards.
  • Air movers increase airflow to ventilate spaces and to help evaporate water from carpets, drywalls, baseboards, sub-floors, and many types of building materials or structures that need to be ventilated or dried. They typically consist of a motorized fan or blower wheel, and housing. Air movers are commonly used for drying applications in the cleaning, building maintenance, and restoration industries.
  • Dri-Eaz manufactures dehumidifiers, air movers, structural drying systems, and air scrubbers for water damage restoration applications, and for the drying, cleaning, and building maintenance industries.

* Prices are subject to change. Delivery or trailer rental fees, if applicable, will be added at time of reservation.
* Please call us with any questions about our air mover fan 6 position dri eaz in Spartanburg, Greenville, Gaffney, Simpsonville, and the Upstate Region of South Carolina.